Active filters
16-ch Digital Input Module Channels:16. Digital Input;Dry Contact;Logic level 1: close to Iso.GND;Logic level 0: open;Wet Contact;Rated voltage: 24VDC;Logic level 1: 10~30 VDC;and -10~-30 VDC;Logic level 0: -3~3 VDC. Input Delay:From logic level 0 to 1: 4ms;From logic level 1 to 0: 4ms. Digital Filter: 3ms.
EtherCAT Slice IO Smart Power Input Module with 4-ch DI Channels : 4. Digital Input : Wet Contact. Rated voltage: 24 VDC. Logic level 1: 10~30 VDC and -10~-30 VDC. Input Delay : From logic level 0 to 1: 4 ms. From logic level 1 to 0: 4 ms. Logic level 0: -3~3 VDC. Digital Filter : 3ms.
Edge Intelligent DAQ Controller Support Modbus/RTU, Modbus/TCP Master and Slave function libraries. C and Python programming based on Linux operating system. Support Web server for I/O configuration and monitoring. Built-in real-time clock and watchdog timer. 4 serial communication ports onboard. 2 Ethernet Ports. 4 or 8 I/O slot expansion. 1 micro SD...
16 Universal DI/O Remote I/O Module for ADAM-5000 Digital input: Support Dry/Wet Contact. Digital output: Open Collector to 30 V, 450 mW max. load. I/O Type: bit-wise selectable by DIP switch. Power consumption: 0.35 W (typical); 1.2 W (max). Channels: 16.
PC-based Controller Celeron 3955U, 4G DD 6th generation Intel® Core™ i7/i5/Celeron processors up to 2.6 GHz with 4GB/8GB DDR4 memory. 2 x GbE, 4 x USB 3.0, 2 x RS-232 /422/485, 1 x VGA, 1 x HDMI. Dual power input with alarm output. Compact and fanless design for DIN-rail mount in Control cabinet. Maximum 4 expansion capability on left side for AMAX-54XX...
16DI Remote I/O Module with LED for ADAM-5000 Input voltage: 30 Vmax. Circuit type: Pull-Up current: 0.5 mA (Source Type). LED indicator: Yes. Power consumption: 0.84 W(max.). Channels: 16.
16-ch Source Type Digital Output Module Channels:16 (Source Type). Voltage Rating:10~30VDC. Rated Current Output:0.5A per channel atsignal "1". Leakage Current:10 μA per channel atsignal "0". Output Delay:From logic level 0 to 1:150μs; From logic level 1 to 0: 2ms.
8 Isolated DI Remote I/O Module for ADAM-5000 Digital input level: Logic level 0: +1 V max. Isolation voltage: 5000 VRMS. Power consumption: 0.27 W (max). Channels: 8.
6-Ch Current AI Module Channels : 6 (Differential). Input Type : mA. Voltage Range : ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA. Input Impedance : 120 Ω. Resolution : 16-bit with ±0.2%. FSR accuracy : @25°C. Sample Rate : 100 sample/s (per channel). Burn-out detection : Yes.
4-ch Analogue Output Module Channels: 4. Output Type: V, mV, mA. Output Range: 0~5V, 0~10V, ±5V, ±10V, 4~20mA, 0~20mA. Resolution: 16-bit with accuracy, 0.01% FSR@25°C. Slew Rate: Configurable. Drift: ± 50 ppm/°C. Current Load Resistor: Max. 500 Ω. Voltage Load Resistor: Min. 1KΩ.
6-Ch Voltage AI Module Channels : 6 (Differential). Input Type : V,mV. Voltage Range : ±150 mV, ±500 mV, ±1V, ±5 V, ±10 V. Input Impedance : >10M Ω. Resolution : 16-bit with ±0.1% FSR accuracy. Sample Rate : 100 sample/s (per channel).
2x iso RS-232/422/485 Module Data Bits: 5, 6, 7, 8. Stop Bits: 1, 1.5, 2. Parity: None, even, odd. Baud Rate: 50 bps ~ 230.4 kbps. Data Signals: RS-232: TxD, RxD, GND RS-422: Tx+, Tx-, Rx+, RXRS-485: Data+, Data-. FIFO: 256 bytes. Flow Control: Xon/Xoff.
4-ch RTD Input EtherCAT Slice IO Module RTD Input. Channels : 4. Input Connections : 2 or 3 wire. Resolution : 16 bit with ±0.1% FSR accuracy. Sample Rate: 100 sample/s (per channel). Burn-out detection: Yes.
6-ch Thermocouple Input Module Channels: 6 differential. Input Type: V, mV, Thermocouple. Input Impedance: >2MΩ. Voltage Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V. Temperature Range: Type J (-210 ~ 1200° C), Type K (-270 ~ 1372° C), Type T (-270 ~ 400° C), Type E (-270 ~ 1000° C), Type R (0 ~ 1768° C), Type S (0 ~ 1768° C), Type B (300 ~ 1820° C)....
EtherCAT Extension Function: Conversion of EtherCAT to 100BASE-TX Ethernet for extension of the EtherCAT network. Cable : Ethernet/EtherCAT cable (min. Cat. 5) shielded. Distance between stations : Max. 100 m (100BASE-TX). Bus Interface : 1 x RJ45. Power from bus : N/A.
8-ch Digital Input Module Channels: 8. Digital Input: Dry Contact Logic level 1: close toIso.GND; Logic level 0: open; Wet Contact Rated voltage: 24VDC; Logic level 1: 10~30 VDCand -10~-30 VDC; Logic level 0: -3~3 VDC. Input Delay: From logic level 0 to 1: 4ms; From logic level 1 to 0: 4ms. Digital Filter: 3ms.
16-ch Sink type DO Module Channels:16 (Sink Type). Voltage Rating:10~30VDC. Rated Current Output:0.3A per channel atsignal "1". Leakage Current:25 μA per channel atsignal "0". Output Delay:From logic level 0 to 1:10μs;From logic level 1 to 0: 100μs.
1-ch SSI Encoder Module Encoder Type: SSI (Binary / Gray code). Latch Counter Value. Comparator *2. Compare trigger Output *2.
8-ch Sink Type Digital Output Module Channels: 8 (Sink Type). Voltage Rating: 10~30VDC. Rated Current Output: 0.3A per channel at signal "1". Leakage Current: 25 μA per channel at signal "0". Output Delay: From logic level 0 to 1: 10μs; From logic level 1 to 0: 100μs.
2-ch DO Timestamp Module Precise and Deterministic Digital Output. 2-ch Timestamp Digital Output. Timestamp resolution: 1ns. Synchronized Digital Output.
16 Isolated DI Remote I/O Module for ADAM-5000 50 Vmax Input Voltage. 2500 Vdc Optical Isolation. 70 Vdc Over Voltage Protection. 16-channel.
12-ch Analog Input Module 12-ch voltage and current input. Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA. 2500 VDC over voltage protection. Input characteristic curve according to IEC 61131, type 1. Isolation between channels and backplane.
8-ch Source Type Digital Output Module Channels: 8 (Source Type). Voltage Rating: 10~30VDC. Rated Current Output: 0.5A per channel at signal "1". Leakage Current: 10 μA per channel at signal "0". Output Delay: From logic level 0 to 1: 150μs; From logic level 1 to 0: 2ms.
12-ch Thermocouple Input Module Isolation between channels and backplane. Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple). Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA. Supports configurable input channels with different input type and range. High density 12-ch analog...
16DI Remote I/O Module for ADAM-5000 Input voltage: 30 Vmax. Circuit type: Pull-Up current: 0.5 mA (Source Type). Power consumption: 0.53 W. Channels: 16.
24-ch Digital Input Module Supports both sink and source type input. Rated voltage input value: 24 VDC. ±70 VDC over voltage protection. Input characteristic curve according to IEC 61131, type 1. Each digital channel has its own status LED. Isolation between channels and backplane.
4-slot Edge Intelligent DAQ controller Support Modbus/RTU, Modbus/TCP Master and Slave function libraries. C and Python programming based on Linux operating system. Support Web server for I/O configuration and monitoring. Built-in real-time clock and watchdog timer. 4 serial communication ports onboard. 2 Ethernet Ports. 4 or 8 I/O slot expansion. 1 micro...
2-ch DI Timestamp, 6-ch DI w/o Timestamp Precise and Deterministic Digital Input. 2-ch Timestamp Digital Input. 6-ch Regular Digital Input. Timestamp resolution: 1ns. Rising Edge & Falling Edge DI Latch.
1-ch TTL/RS-422 Encoder/Counter Module Overflow/underflow detection . Latch counter value . Reset counter value. Set counter value. Input filter. Position compare output. Reversion of A/B phase Input. Frequency measurement (Pulse Input).
12-ch High Speed Analog Input Module 12 analog input channels (12-bit, 1000 sample/second per channel). Supports various input types: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~20 mA. Each input channel can be configured with different input types and range. 2500 VDC optical isolation between channels and backplane bus. ±35 VDC over voltage...
12-ch Relay Output Module Relay type: Form A (SPST). Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC. Each digital channel has its own status LED. Isolation between channels and backplane bus.
4-ch High Speed AI Module Channels : 4 (Differential). Input Type : V, mA. Voltage Range : ±10 V, 0 ~ 10 V, 0 ~ 20 mA. Input Impedance : 800 kΩ, for voltage input, 500 Ω, for current input. Resolution : 16-bit with ±0.1% for voltage input, 16-bit ±0.2% for current input. FSR accuracy : @25°C. Sample Rate : 10k sample/s (per channel) .
EtherCAT Coupler with ID Switch Function : Coupling EtherCAT IO modules to 100BASETX EtherCAT network. Cable : Ethernet/EtherCAT cable (min. Cat. 5), shielded. Distance between stations : Max. 100 m (100BASETX). Number of configurable IDs : 256 (2 x 16-bit ID switch). Bus Interface : 2 x RJ45 (1 x Input, 1 x Output).
8-ch RTD Module Wire Burn-out Detection. High Density Channel design, total 8 channels.
4/8-ch High Speed Counter Module Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode. 4 or 8 counter channels depends on operating modes. 32-bit counter range with 1 bit overflow/underflow. 1 MHz counter frequency. 4 digital input channels with counter gate functionality. 4 digital...
PC-based Controller CORE I5 6300U, 8G DD 6th generation Intel® Core™ i7/i5/Celeron processors up to 2.6 GHz with 4GB/8GB DDR4 memory. 2 x GbE, 4 x USB 3.0, 2 x RS-232 /422/485, 1 x VGA, 1 x HDMI. Dual power input with alarm output. Compact and fanless design for DIN-rail mount in Control cabinet. Maximum 4 expansion capability on left side for AMAX-54XX...
2x CAN Module 2-ch CAN port. Support CAN2.0B, compatible with CAN2.0A. Data Transfer Rate: 1Mbits/s. Optical isolation protection of 2,500 VDC ensures system reliability.
PCIe-mini card expansion module Interface: Full size mini PCI express 2.0. SIM card slot: Nano SIM card. Antenna: 1x SMA hole on the top.
2-slot Backplane Module Two slots for two APAX-5000 modules. With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion. Supports both DIN-rail and wall mounting. Hot swap mechanism for all APAX I/O modules. 30G shock resistance and 2Grms vibration resistance.
PC-based Controller CORE I7 6600U, 8G DD 6th generation Intel® Core™ i7/i5/Celeron processors up to 2.6 GHz with 4GB/8GB DDR4 memory. 2 x GbE, 4 x USB 3.0, 2 x RS-232 /422/485, 1 x VGA, 1 x HDMI. Dual power input with alarm output. Compact and fanless design for DIN-rail mount in Control cabinet. Maximum 4 expansion capability on left side for AMAX-54XX...
4x USB 3.0 Module Host Bus 4-lane Gen 2.0 PCIe interface, compliant with PCIExpress Base Specification, Revision 2.0. Controller Host Controller – Fresco FL1100Compliant with USB 3.0 Specification and Intel® xHCI Specification, Revision 1.0. Max. Current: 1500 mA maximum per port. Data Transfer Rate: SuperSpeed (5.0 Gbps); High Speed (480.0 Mbps); Full...
2x GigE Module Compatibility: IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3af. Speed: 10/100/1000 Mbps. No. of Ports: 2 Gigabit Ethernet Media Access Control (MAC) andphysical layer (PHY) ports. Input Voltage: 24 VDC direct from WISE-5000 CPU module.
