Active filters
ROM-DB7503 Qseven 2.1 Carrier Board Supports Qseven V2.1 RISC odule. Mini-ITX form factor. Dual display outputs HDMI 2.0 and 24-bit LVDS . Supports 1 x PCIe, 1 x GbE, 4 x USB 2.0, 1 x USB OTG2.0, 1 x SATAII, 1 x I2C, 1 x I2S, 1 x CANbus, 8 x GPIOs. Support AT/ATX mode, Input power +12V. Cable pack included. Evaluative image & test utility built-in. .
CIRCUIT BOARD, Development board for SMARC v2.0 RISC Module ser Supports SGeT SMARC v2.0 CPU module board. 4 kinds of display outputs, 18/24-bit LVDS or MIPI DSI, HDMI, DP. 1 x SATA/SATA-DOM, 2 x RJ-45, 1 x USB 3.0 Type C, 1 x USB 2.0 OTG, 1 x USB 3.0, 1 x USB 2.0, 2 x USB 2.0 Pin Headers, 2 x CAN bus, 4 x UART, 12 x GPIO. 3 x PCIe by 1. 2 x MIPI-SCI2...
Development board for RTX 2.1 Supports RTX2.0 CPU Module Board. 3 display outputs. VGA, HDMI, 24-bit LVDS. 1 SATA/SATA-DOM, 1 RJ-45, 1 USB 2.0/3.0, 2 CAN bus, 4 UART, 10 GPIO. 2 PCIe slots. 2 MIPI interfaces for camera module. Onboard eMMC Flash 4 GB, SD card, SIM card slot. HD I2S Audio codec.
ROM-3420 Evaluation kit Evaluation kit for ROM-3420. High performance NXP i.mx6 dual-core 1GHz processor. Onbard DDR3 1GB memory and eMMC 4GB. Parallel RGB, HDMI, Single channel 24bit LVDS, 1366 x 768. Supports 4 GB eMMC Flash, 1 SD/MMC, 1 SATA. Supports 1 PCIe, 1 GbE, 1 USB 2.0, 1 USB OTG2.0, 1 SATAII, 4 I2C, 1 I2S, 1 Camera in, 2 CANbus 2.0B, 10 GPIO, 1...
EVB for SMARC v2.0/2.1 RK3399 risc modul Supports SGeT SMARC v2.0 CPU module board. 4 kinds of display outputs, 18/24-bit LVDS or MIPI DSI, HDMI, DP. 1 x SATA/SATA-DOM, 2 x RJ-45, 1 x USB 3.0 Type C, 1 x USB 2.0 OTG, 1 x USB 3.0, 1 x USB 2.0, 2 x USB 2.0 Pin Headers, 2 x CAN bus, 4 x UART, 12 x GPIO. 3 x PCIe by 1. 2 x MIPI-SCI2 interfaces for camera...
Development board for RISC Q7 module Supports 24-bit LVDS Panel. Supports 24-bit LVDS Panel. Supports 1 PCIe x1. Supports 1 SATA, 4 UART, 1 RJ-45, 4 USB 2.0 (with 1 OTG). HD Audio Codec. Supports dual CAN bus. Supports VGA and HDMI out. Onboard SD card slot, SIM card slotRoHSCOMPLIANT2002/.
Development board for RTX 2.0 Supports RTX2.0 CPU Module Board. 3 display outputs. VGA, HDMI, 24-bit LVDS. 1 SATA/SATA-DOM, 1 RJ-45, 1 USB 2.0/3.0, 2 CAN bus, 4 UART, 10 GPIO. 2 PCIe slots. 2 MIPI interfaces for camera module. Onboard eMMC Flash 4 GB, SD card, SIM card slot. HD I2S Audio codec.
