SCSI-100 to 2*SCSI-50 Shielded Cable, 2m 100-Pin to two 50-Pin SCSI-II Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 20276...
DB37 Cable, 2m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
Isolated DC Input/Output Module 1000 V DC , fully isolated. Easy input/output range configuration. Low power consumption, 0.85 W (Voltage Output). Wide input/output range. Flexible DIN-rail mounting. Operates from single +24 VDC. Temperature range 0 to 70°C.
50-pin DIN-rail Wiring Board w/ LED Indicators Low-cost DIN-rail mounting wiring terminal module for PCI-1752/1754/1756 with 50-pin SCSI female connector. Screw-clamp terminal blocks allow easy and reliable connections. Each LED indicates its current bi-directional I/O logic status with either green or red light. Case dimensions (W x L x H): 77.5 x 179.5...
DB37 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector. Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0"). To Be Used With PCI-1713U, PCI-1715U, PCI-1718HDU, PCI-1720U, PCI-1730U, PCI-1733, PCI-1734, PCI-1750, PCI-1760U, PCI-1761.
DB37 Cable, 1m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
Double-shielded cable with DB-62 connectors, 1m DB-62 pin male black insulated connector x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL2464 approved. Color : Gray.
DB9 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector. Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1" x 1.8" x 2.0"). To Be Used With PCI-1714U/UL, PCL-728, PCL-740, PCL-741, PCL-743B, PCL-745B.
68-pin DIN-rail SCSI Wiring Board DIN-rail mounting screw terminal module for industrial applications with 68-pin SCSI female connecto. Case dimensions (W x L x H): 77.5 x 191.2 x 51 mm (3.1" x 8.4" x 2.0"). To Be Used With PCI-1710U/UL/1710HGU/1711U/UL,PCI-1712/L,PCI -1716/L,PCI-1741U/1742U/1747U/1780U.
68-Pin to Two 50-Pin Converter Module DIN-rail mounting terminal for industrial applications with 68-pin SCSI-II female connector. Converts one 68-pin SCSI-II connector to 50-pin Opto-22 compatible box headers. Case dimensions ( W x L x H) : 77 x 101 x 54.3 mm (3.0 " x 4.0 x 2.1). To be used with PCI-1751,PCI-1753,PCI-1753E.
SCSI-100 to 2*SCSI-50 Shielded Cable, 1m 100-Pin to two 50-Pin SCSI-II Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 20276...
SCSI-68 Wiring Terminal w/CJC, DIN-rail Low-cost screw-terminal with 68-pin SCSI-II connector. Onboard CJC (Cold Junction Compensation) circuits for direct thermocouple measurement. Reserved space for signal-conditioning circuits such as low-pass filter, voltage attenuator and current shunt. Industrial-grade screw-clamp terminal blocks for heavy-duty and...
SCSI-68 Shielded Cable, 2m Weight :240g. Double-shielded cable with SCSI-II 68-pin male connector. Insulated half pitch 68pin copper alloy gold plated male connector with thumb screw. 34 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919 approved. Color :Grey.
Isolated Strain Gauge Input Module 1000 VDC 3-way optical isolation. Switch configurable mV or V input of full bridge. Switch configurable voltage and current outputs.
100-pin DIN-rail SCSI Wiring Board Low cost universal DIN-rail mounting screw terminal module for industrial applications with 100-pin SCSI female connector. Dimensions (W x L x H): 80 x 230 x 42 mm (3.14" x 9.05" x 1.65").
SCSI-68 Shielded Cable, 1m Weight :240g. Double-shielded cable with SCSI-II 68-pin male connector. Insulated half pitch 68pin copper alloy gold plated male connector with thumb screw. 34 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919 approved. Color :Grey.
DB62 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB62 female connector. Screw-clamp terminal blocks allow easy and reliable connections. Case dimensions (W x L x H): 77.5 x 124.5 x 63.5 mm (3.1" x 4.9" x 2.5"). To Be Used With PCI-1762.
20-pin DIN-rail Flat Cable Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connector. Case dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0"). To Be Used With PCI-1735U, PCL-711B, PCL-720+, PCL-726, PCL-727, PCL-730, PCL-812PG, PCL-816, PCL-818 Series, PCL-836.
16-ch Relay Output Terminal Automatic selection of control logic (PLCD-785B only): Negative logic for the Opto-22 connector Positive logic for the 20-pin flat cable connector. Screw terminals for easy output wiring. LED status indicators.
PS/2 to DB9 Cable DB-9 Pin to PS/2 6 Pin cable assembly with shielding. Side A: D-Sub 9 pin copper alloy gold flash over nickel plated contact with thumb screw. Side B: Mini din 6 pin copper alloy tin planted. 3 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2464...
16/24-ch Opto-isolated DI Board Compatible with all PC-LabCard™ products with DI channels on either 20-pin flat cable or 50-pin Opto-22 compatible connectors. 24 optically-isolated digital input channels. Built-in screw terminals for easy input wiring. LEDs indicate input logic status. Inputs buffered with voltage comparators.
Double-shielded cable with DB-62 connectors, 3m DB-62 pin male black insulated connector x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL2464 approved. Color : Gray.
High-Speed DB37 Cable, 1m Double-shielded cable with high Speed 37-pin D-sub connectors. D-Sub 37 pin male x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Color : Gray. Weight 375g.
SCSI-100 to 2*SCSI-68 Ribbon-Type Cable, 2m Double-shielded cable with 100-Pin to two 68-Pin SCSI connector. HPCN100: Male black insulation nickel plated. HPDB68: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919...
Isolated RTD Input Module 1000 VDC 3-way optical isolation. Built-in microprocessor. Switch configurable for 0~5 V, 0~10 V or 0~20 mA outputs. Switch configurable Pt and Ni RTD input ranges.
20-pin Flat Cable, 1m IDC 20-pin socket connector x 2. Flat cable with 20 pin IDC sockets connector. Flat Cable. Color : Multicolored.
SCSI-100 to 2*SCSI-68 Ribbon-Type Cable, 1m Double-shielded cable with 100-Pin to two 68-Pin SCSI connector. HPCN100: Male black insulation nickel plated. HPDB68: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919...
DB-37 Wiring Terminal Pin to pin design. Low-cost universal screw-terminal boards for industrial applications. 40 terminal points for two 20-pin flat cable connector ports. Reserved space for signal-conditioning circuits, such as a low-pass filter, voltage attenuator and c. Table-top mounting using nylon standoffs. Screws and washers provided for panel...
2*IDC-20 Wiring Terminal Pin to pin design. Low-cost universal screw-terminal boards for industrial applications. 40 terminal points for two 20-pin flat cable connector ports. Reserved space for signal-conditioning circuits, such as a low-pass filter, voltage attenuator and c. Table-top mounting using nylon standoffs. Screws and washers provided for panel...
50-pin DIN-rail Flat Cable Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with 50-pin flat cable connector. Case dimensions (W x L x H): 77.5 x 146.3 x 51 mm (3.1" x 5.8" x 2.0"). To Be Used With USB-4751/L, PCI-1737U, PCI-1739U, PCL-722, PCL-724, PCL-731.
Active filter board Low-pass active filter. 8 set of low-pass Frequencies form 10Hz up to 40KHz. 2 single-ended or 1 differential AI inputs. Offset and gain calibration.
24/24-ch Relay Output/Isolated DI Board Built-in plug-in screw terminals for easier wiring. LED status indicators for D/I and relay output. Digital inputs buffered with voltage comparators. Wet/Dry contact set by DIP switches for D/I. Wide input range from 5 to 30 V. INT/EXT Power selection by jumper.
DB37 Cable, 3m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
DB-37 Wiring Terminal w/CJC Circuit Low-cost screw-terminal boards. Onboard CJC (Cold Junction Compensation) circuits for direct thermocouple measurement. Reserved space for signal-conditioning circuits, such as a low-pass filter, and more. Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections. Supports PCL-818 series...
68-pin SCSI DIN-rail Wiring Board with CJC 16-single-ended or 8 differential AI inputs, programmable. On-bard CJC circuit for direct thermocouple measurement. Reserved space for signal-conditioning circuit such as PCLD-8811. Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections. DIN-rail mounting case for easy mounting....
DB25 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with DB25 connector. Screw-clamp terminal blocks allow easy and reliable connections. Case dimensions (W x L x H): 77.5 x 56.3 x 51 mm (3.1" x 2.2" x 2.0"). To Be Used With PCI-1757UP, PCL-833.
16-ch Power Relay Output Terminal Accepts 20-pin or 50-pin (Opto-22 compatible) connectors. 16 single-pole single-throw (SPST) relays. High-power relay handles up to 5 A @ 250 VAC. Onboard varistors protect all relay contact points. Industrial screw terminals for ease of wiring. LED status indicators. +5 V/+12 V power/status LED indicator.
BNC to BNC Cable, Male Braid-shielded coax cable with steel nickel plated male BNC plug connectors. Male BNC plug connector x 2. Braid-shielded coax wire. Isolated P.V.C jacket. Color : Black.
High-Speed DB37 Cable, 1m Double-shielded cable with high Speed 37-pin D-sub connectors. D-Sub 37 pin male x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Color : Gray. Weight 375g.
SCSI-100 to 2*SCSI-50 Shielded Cable, 1m 100-Pin to two 50-Pin SCSI Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919...
2m, SCSI shield cable with noise rejecti Weight :240g. Double-shielded cable with SCSI-II 68-pin male connector. Insulated half pitch 68pin copper alloy gold plated male connector with thumb screw. 34 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919 approved....
External Powered IEPE Signal Conditioner IEPE current support: 4, 6, 10 mA. External powered operation eliminates line noise. LED indicator for sensor open, short and normal.
100Pin to two 50Pin SCSICable for PCI-12 100-Pin to two 50-Pin SCSI Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919...
Isolated AC Current Input Module 0 ~ 5 VAC to 0 ~ 5 VDC. AC current measurement. 1,000 VDC isolation between output and power. Input impendence: 2 Mohm. 2,500 VAC isolation between output and input. Accuracy: ±0.1% FSR. Flexible Din-rail mounting. Operates from a single +24VDC.
Wiring Terminal for PCI-1712, DIN-rail Low-cost screw-terminal with 68-pin SCSI-II connector. Reserved space for signal-conditioning circuits such as low-pass filter, voltage attenuator and current shunt. Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections. DIN-rail mounting case for easy mounting. Supports PCI-1710U/UL,...
