Industrial Automation

16-Ch Isolated DI Module w/ LED & Modbus 16ch digital input. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 2500VDC isolation protection.

6-Ch RTD Module w/ Modbus 6ch RTD. Protocols:Modbus RTU,ASCII. Watch dog to recover the system. 3000VDC isolation protection. Wiring burned-out detection function.

18-Ch Isolated DI/O Module 12ch digital input(counter)/6ch digital output(pulse output). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful API,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

7" WVGA, 64MB, 128MB(NAND),Serialx3,Ethe ARM9™ 32-bit RISC processor with 64 MB SDRAM working memory. Supports over 500+ PLC industrial communication protocols. Backup memory 128KB for retaining critical data or parameter. Supports the HMINavi Designer development tool free on Windows 10. Supports HMINavi Runtime data downloads through Serial, Ethernet,...

SCSI-100 to 2*SCSI-50 Shielded Cable, 2m 100-Pin to two 50-Pin SCSI-II Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 20276...

8DI 2.4G WiFi IoT Wireless I/O with 1RS-485 WiFi 2.4 GHz IEEE 802.11b/g/n WLAN. Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, MQTT. Supports file-based cloud storage and local logging with RTC time stamp. Supports RESTful web API in JSON format for IoT integration. Configured by mobile devices directly without installing any software or App.

4-ch DI and 4-ch DO IoT Wireless I/O Mod WiFi 2.4GHz IEEE 802.11b/g/n WLAN. Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, MQTT. Supports file-based cloud storage and local logging with RTC time stamp. Supports RESTful web API in JSON format for IoT integration. Configured by mobile devices directly without installing software or App.

32-ch Isolated Digital I/O Universal PCI Card ISA-compatible with PCL-730. 32-ch TTL DI/O (16-ch digital input,16-ch digital output). High output driving capacity. Interrupt handling capability. 2 x 20-pin connectors for isolated DI/O channels. 2 x 20-pin connectors for TTL DI/O channels. D-type connector for isolated input and output channels....

8AI IoT Modbus/SNMP/MQTT 2Ports Ethernet Remote I/O 8ch analog input(voltage or current). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Cloud access: Data update to Azure. Auto-bypass function to ensure daisy-chain data transmission. Peer-to-Peer function to map I/O status. Built-in web server. Watchdog timer...

6Relay/6DI IoT Modbus/SNMP/MQTT Ethernet Remote I/O I/O:6ch relay/6ch digital input(counter). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

16-ch Relay and 16-ch Isolated Digital Input PCI Card 16 relay output channels and 16 isolated digital input channels. LED indicators to show activated relays. Jumper selectable Form A/Form B-type relay output channel. Wide input range (10 ~ 50 VDC). Retain relay output values when hot system reset. High-voltage isolation on input channels (2,500 VDC)....

16DI IoT Modbus/SNMP/MQTT 2Ports Ethernet Remote I/O 16ch digital input(counter). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Cloud access: Data update to Azure. Auto-bypass function to ensure daisy-chain data transmission. Peer-to-Peer function to map I/O status. Built-in web server. Watchdog timer to...

6Pwer Relay/6DI IoT Modbus/SNMP/MQTT Ethernet Remote I/O I/O:6ch relay/6ch digital input(counter). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

8-ch Relay and 8-ch Isolated Digital Input PCI Card Wide input range (10 ~ 50 VDC). 8 relay output channels and 8 isolated digital input channels. LED indicators to show activated relays. 4 Form C and 4 Form A type relay output channels. Interrupt handling capability. Output status read-back. Retained relay output values when hot system reset....

DB37 Cable, 2m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.

16 Isolated DI Remote I/O Module for ADAM-5000 50 Vmax Input Voltage. 2500 Vdc Optical Isolation. 70 Vdc Over Voltage Protection. 16-channel.

32-ch Isolated Digital I/O and 1-ch Counter PCI Card 16 isolated DI and 16 isolated DO channels. High voltage isolation on all isolated channels (2,500 VDC). High sink current on isolated output channels (200 mA/channel). Supports dry contact or 5 ~ 50 VDC isolated inputs. Interrupt handling capability. Timer/counter interrupt capability.

2-slot Backplane Module Two slots for two APAX-5000 modules. With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion. Supports both DIN-rail and wall mounting. Hot swap mechanism for all APAX I/O modules. 30G shock resistance and 2Grms vibration resistance.

8-Ch AI Module 8ch analog input(voltage or current). Protocols:ASCII. Watchdog timer to recover the system.

8AI Robust Modbus RS-485 Remote I/O 8ch analog input(voltage or current). Operation temperature:-40~85°C,Power input:10VDC~48VDC. Noise protection: 4kV surge(power),4kV EFT,8 kV ESD protection. Interface: RS-485/USB. 3000VDC isolation protection. LED indicator to monitor I/O status.

64-ch Isolated Digital I/O PCI Card Either ± voltage input for DI by group. High-voltage isolation input/output channels (2,500 VDC). Interrupt handling capability. High over-voltage protection (70 VDC) for DI. High-sink current on isolated output channels (200 mA max./channel). Output status readback. Keeps output settings/ values after system hot reset....

12DI/2Counter/2DO IoT Modbus/SNMP/MQTT Ethernet Remote I/O 12ch digital input/2ch counter/2ch digital output(pulse output). Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

4-ch DI and 4-ch Relay IoT Ethernet I/O Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, MQTT. Supports RESTful web API in JSON format. Supports local logging with RTC time stamp. Supports mobile device web configuration in HTML5. Supports 10~30 VDC power with reverse protection.

4.3" WQVGA, 64MB, 128MB(NAND),Serialx3,E ARM9™ 32-bit RISC processor with 64 MB SDRAM working memory. Supports over 500+ PLC industrial communication protocols. Backup memory 128KB for retaining critical data or parameter. Supports the HMINavi Designer development tool free on Windows 10. Supports HMINavi Runtime data downloads through Serial, Ethernet,...

10.1" WSVGA, 64MB, 128MB(NAND),Serialx3, ARM9™ 32-bit RISC processor with 64 MB SDRAM working memory. Supports over 500+ PLC industrial communication protocols. Backup memory 128KB for retaining critical data or parameter. Supports the HMINavi Designer development tool free on Windows 10. Supports HMINavi Runtime data downloads through Serial, Ethernet,...

Isolated DC Input/Output Module 1000 V DC , fully isolated. Easy input/output range configuration. Low power consumption, 0.85 W (Voltage Output). Wide input/output range. Flexible DIN-rail mounting. Operates from single +24 VDC. Temperature range 0 to 70°C.

4-ch DI and 4-ch DO IoT Ethernet I/O Mod Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, MQTT. Supports RESTful web API in JSON format. Supports local logging with RTC time stamp. Supports mobile device web configuration in HTML5. Supports 10~30VDC power with reverse protection.

8AI Remote I/O Module for ADAM-5000 Accuracy: ±0.1% or better. Effective resolution: 16-bit. Input range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V; ±20 mA. Sampling rate: 10 samples/sec. (total). Isolation voltage: 3000 VDC. Fault and overvoltage protection: withstands overvoltage up to ±35 V. lnput type:...

96ch TTL Digital I/O Card Up to 192 (96 + 96) TTL digital I/O lines. Emulates mode 0 of 8255 PPI. Buffered circuits for higher driving capacity than 8255. Multiple-source interrupt handling. Interrupt output pin for simultaneously triggering external devices with the interrupt. Output status read-back. “Pattern match” and “Change of state” interrupt...

10 kS/s, 12-bit, 8-ch Multifunction USB Module Supports USB 2.0. Bus-powered. 8 x analog input channels. 12-bit resolution AI. Sampling rates up to 10 kS/s. 8-ch DI/8-ch DO, 2-ch AO and one 32-bit counter. Portable.

SJA1000 CANBus, CANOpen, DB9 x 2 Meets Advantech Standard iDoor Technology. PCI Express® Mini Card Specification Revision 1.2 compliant. Supports Advantech CANOpen Protocol Library. Operates two separated CAN networks simultaneously. High speed transmission up to 1 Mbps. I/O address automatically assigned by PCIe plug & play. Supports 32/64-bit...

50-pin DIN-rail Wiring Board w/ LED Indicators Low-cost DIN-rail mounting wiring terminal module for PCI-1752/1754/1756 with 50-pin SCSI female connector. Screw-clamp terminal blocks allow easy and reliable connections. Each LED indicates its current bi-directional I/O logic status with either green or red light. Case dimensions (W x L x H): 77.5 x 179.5...

8-Ch Thermocouple Input Module 8ch thermocouple(can be set to voltage or current). Operation temperature:-40~85°C,Power input:10VDC~48VDC. Noise protection: 4kV surge(power),4kV EFT,8 kV ESD protection. Interface: RS-485/USB. 3000VDC isolation protection. LED indicator to monitor I/O status.

2.5' SATA HDD module for PPC-3100S Industrial 10.4" TFT SVGA LED panel with 30k (min.) lifetime backlight. Durable 5-wire Resistive Touch Screen. System memory up to 8 GB DDR3L SDRAM onboard. Embedded Intel processor, quad core Celeron® N2930 1.83GHz onboard. Compact Fanless Design with solid AI Alloy enclosure. True-flat with IP65 certified front...

4AO/4DI Modbus RS-485 Remote I/O 4ch analog output/4ch digital input. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 3000VDC isolation protection.

Mini-SCSI-100 Shielded Cable, 2m Mini-SCSI-100 Shielded Cable, 2m.

4-ch DI and 4-ch Relay IoT Wireless I/O WiFi 2.4 GHz IEEE 802.11b/g/n WLAN. Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, MQTT. Supports file-based cloud storage and local logging with RTC time stamp. ŸSupports RESTful web API in JSON format for IoT integration. Configured by mobile devices directly without installing software or App.

8 AI Remote I/O Module with Independent Input Range for ADAM-5000 Accuracy: Voltage mode : ±0.1% or better, Current mode : ±0.2% or better. High Common Mode: 200 VDC. Over Voltage Protection: ±60 VDC. Built-in TVS/ESD Protection. Isolation Voltage: 3,000 VDC. CMR @ 50/60 Hz: 92 dB min. Channels: 8 differential and independent configuration channels. Input...

Standard 8-Axis DSP-Based SoftMotion Co Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...

8AI/2DO IoT Modbus/SNMP/MQTT Ethernet Remote I/O 8ch analog input(voltage or current)/2ch digital output. Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

8AI/2DO IoT Modbus/SNMP/MQTT Ethernet Remote I/O 8ch analog input(voltage or current)/2ch digital output. Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII. GCL to perform basic logic control rules. Peer-to-Peer function to map I/O status. Cloud access: Data update to Azure. Built-in web server. Watchdog timer to recover the system.

Isolated Strain Gauge Input Module 1000 VDC 3-way optical isolation. Switch configurable mV or V input of full bridge. Switch configurable voltage and current outputs.

8DI RS-485 Remote I/O 8ch digital input. Protocols:ASCII. Watchdog timer to recover the system. 5000VRMS isolation protection.

DB37 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector. Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0"). To Be Used With PCI-1713U, PCI-1715U, PCI-1718HDU, PCI-1720U, PCI-1730U, PCI-1733, PCI-1734, PCI-1750, PCI-1760U, PCI-1761.

12DI/12DO Intelligent I/O Gateway Linux Open Platform. 12ch digital input(counter)/12ch digital output(pulse output). Programming: linux C API, Node-RED (graphic programming environment). Cloud/Database access ,edge data analysis and logic control, data visulization by dashboard. Interfaces: RS-485x2, Ethernet port x 2 ,1 x USB Type-A 2.0, 1 x USB Micro-B...

1282x1026 1.3MP 1/1.8" Mono 60fps GigE Best price/performance ratio CCD and CMOS sensor options. Resolution up to 20 MP. 100 m cable length. Ultra small form factor. Built in 56 MB frame buffer. Power over Ethernet.

2AI/2DI/1DO Wireless Modular I/O with 1RS-485 12V power output for sensors. 2 analog input, 2 digital input, 1 digital output, 2 power output with 1 RS-485 I/O. Modular IoT I/O module to pair with WISE-4600 series.

Double-shielded cable with DB-62 connectors, 1m DB-62 pin male black insulated connector x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL2464 approved. Color : Gray.

Intelligent Stack Light Monitoring Sens One product for all scenarios. Fits a variety of stack-type light towers. 8 light sensors for fast flexible installation. No need to stop the machinery while deployment. Remote intelligent OEE solution by pairing with WISE-4000 series wireless I/O module. Low power consumption for WISE-4000 LPWAN series.

1AO RS-485 Modbus Remote I/O 1ch analog output. Protocols:ASCII / Modbus. Watchdog timer to recover the system. 3000VDC isolation protection.