Centralized Motion Control Card

Centralized Motion Control Card

There are 11 products.

Showing 1-11 of 11 item(s)

Active filters

Advantech ADAM-3940-AE

AMAX-2240 Series wiring board DIN-rail wiring board. Dimensions (W x L x H): 160 x 50 x 43 mm (6.3" x 2" x 1.7"). 40-pin box header connector. LED indicators.

  • Out-of-Stock
Advantech ADAM-3952-AE

PCI-1240 Wiring Terminal, DIN-rail Mount DIN-rail wiring board. Dimensions (W x L x H): 77.5 x 179.5 x 41.5 mm (3.1" x 7.1" x 1.6"). 50-pin SCSI and IDC connectors.

  • Out-of-Stock
Advantech ADAM-3956-BE

4-Axis 100-pin SCSI DIN-rail motion wiri DIN-rail wiring board for PCI-1240/1245/1245E/1245V/1245L/1265/1285/1285E application. Dimensions (W x L x H): 122 x 171 x 45mm (4.8" x6.73" x 1.77"). DB-26 connector. LED indicators.

  • Out-of-Stock

2-axis Stepping/Pules-type Servo Motor C Independent 2-axis motion control. Hand wheel and jog function. 2-axis linear interpolation function. 2-axis circular interpolation function. Continuous interpolation function. Programmable T/S-curve acceleration/deceleration rate. Up to 4 Mpps output for each axis. Two pulse output types: CW/CCW or...

  • Out-of-Stock
Advantech PCI-1240U-B2E

4-Axis Stepping/Pules-type Servo Motor C Independent 4-axis motion control. Hand wheel and jog function. 2/3-axis linear interpolation function. 2-axis circular interpolation function. Continuous interpolation function. Programmable T/S-curve acceleration/deceleration rate. Up to 4 MPPS output for each axis. Two pulse output types: CW/CCW or...

  • Out-of-Stock
Advantech PCI-1245-AE

Standard 4-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...

  • Out-of-Stock
Advantech PCI-1245E-AE

Economic 4-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported). Supports E-Gear (only for PCI-1245E). Hardware emergency input. Watchdog timer. Position latch via ORG & index signal....

  • Out-of-Stock
Advantech PCI-1245L-AE

Basic 4-Axis SoftMotion Controller Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting. Supports 2 axis linear interpolation. Supports T/S-curve. Supports speed override. Hardware emergency input. Watchdog timer. Supports programmable...

  • Out-of-Stock
Advantech PCI-1265-AE

Standard 6-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...

  • Out-of-Stock
Advantech PCI-1285-AE

Standard 8-Axis DSP-Based SoftMotion Co Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...

  • Out-of-Stock
Advantech PCI-1285E-AE

Economic 8-Axis DSP-Based SoftMotion Co Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported). Supports E-Gear (only for PCI-1245E). Hardware emergency input. Watchdog timer. Position latch via ORG & index signal....

  • Out-of-Stock