30 kS/s, 12-bit, 16-ch ISA Multifunction Card 16 single-ended analog inputs. 12-bit A/D converter, with up to 30 kHz sampling rate. Programmable gain. Two 12-bit analog output channels. 16 digital inputs and 16 digital outputs. Onboard programmable counter. A/D with DMA or interrupt.
40 kS/s, 12-bit, 16-ch ISA Multifunction Card 16 single-ended or 8 differential analog inputs. 12-bit A/D converter, with up to 100 kHz sampling rate. Programmable gain. Automatic channel/gain scanning. Onboard FIFO memory (1024 samples, PCL-818HD/HG only). One 12-bit analog output channel. 16 digital inputs and 16 digital outputs. Onboard programmable...
32-ch Isolated Digital I/0 ISA Card 32 isolated DIO channels (16 inputs and 16 outputs). 32 TTL-level DIO channels (16 inputs and 16 outputs). High output driving capacity. Interrupt capability. Two 20-pin connectors for isolated digital I/O channels and two for TTL digital I/O channels. D-type connector for isolated input and output channels....
6-ch, 16-bit Counter/Timer ISA Card Periodic interrupt generation. 6 independent 16-bit counters. Digital filter for noise reduction. Binary or BCD counting. Programmable frequency output. Complex duty-cycle output. Single-shot output. 16-bit TTL input and 16-bit TTL output ports. Selectable interrupt input channel. Up to 10 MHz input frequency....
12bit, 2ch Analog Output Card Independent analog output channels. 12-bit resolution double-buffered D/A converter. Multiple voltage ranges: ±10 V, ±5 V, 0 ~ +5 V, 0 ~ +10 V and 4 ~ 20 mA current loop (sink). 16 digital input and 16 digital output channels (PCL-726). Two DB9 connectors for easy wiring (PCL-728).
48-ch Digital I/O ISA Card 48 TTL digital I/O channels. Emulates mode 0 of 8255 PPI. Interrupt handling. Opto-22 compatible 50-pin connectors. Output status readback.
8-ch Relay and 8-ch Isolated Digital Input ISA Card 8 relay output channels and 8 isolated digital input channels. LED indicators to show activated relays. 4 Form C and 4 Form A type relay output channels. Male DB37 matching connector included. Output status read-back.
100 kS/s, 12-bit, 16-ch ISA Multifunction Card 16 single-ended or 8 differential analog inputs. 12-bit A/D converter, with up to 100 kHz sampling rate. Programmable gain. Automatic channel/gain scanning. Onboard FIFO memory (1024 samples, PCL-818HD/HG only). One 12-bit analog output channel. 16 digital inputs and 16 digital outputs. Onboard programmable...
PCL-818L with PCLD-8115 and PCL-10137 16 single-ended or 8 differential analog inputs. 40 kHz 12-bit A/D converter. Programmable gain for each input channel (up to 8). Automatic channel/gain scanning with DMA. 16 digital inputs and 16 digital outputs. Low cost package of PCL-818L with PCLD-8115 and PCL-10137.
32ch Isolated Digital Input Card 32 isolated, bidirectional digital input channels. High-voltage isolation (2,500 VDC). Interrupt capacity. D-type connectors for isolated input channels. Reverse voltage protection for isolated input channels (up to 24 VDC).
12bit, 6ch Analog Output Card Independent analog output channels. 12-bit resolution double-buffered D/A converter. Multiple voltage ranges: ±10 V, ±5 V, 0 ~ +5 V, 0 ~ +10 V and 4 ~ 20 mA current loop (sink). 16 digital input and 16 digital output channels (PCL-726). Two DB9 connectors for easy wiring (PCL-728).
32-ch Isolated Digital Output ISA Card 32 isolated digital output channels. High output driving capacity. High-voltage isolation on output channels. High sink current on isolated output channels (200 mA/channel). Integral suppression diodes for inductive loads. Wide output range (5 ~ 40 VDC). D-type connectors for isolated output channels.
12-ch Relay ISA Card 12 relay outputs. LED relay status indicators. Male DB37 matching connector included. Relay status readback function.
144-ch Digital I/O ISA Card Emulates 8255 PPI mode 0. Buffered circuits for higher driving capacity than the 8255. Interrupt handling. Output status readback. Pin compatible with Opto-22 I/O module racks.
24-ch Digital I/O ISA Card 24 TTL digital I/O channels. Emulates mode 0 of 8255 PPI. Interrupt handling. Opto-22 compatible 50-pin connectors. Output status readback.
