32-ch IDI & 32-ch IDO EtherCAT Remote I/ Suitable for EtherCAT networks. 32-ch digital input and 32-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT...
4-Axis 100-pin SCSI DIN-rail motion wiri DIN-rail wiring board for PCI-1240/1245/1245E/1245V/1245L/1265/1285/1285E application. Dimensions (W x L x H): 122 x 171 x 45mm (4.8" x6.73" x 1.77"). DB-26 connector. LED indicators.
Standard 4-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...
Basic 4-Axis SoftMotion Controller Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting. Supports 2 axis linear interpolation. Supports T/S-curve. Supports speed override. Hardware emergency input. Watchdog timer. Supports programmable...
4-axis EtherCAT Motion Slave Module Max. 5 MHz, 4-axis pulse output. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. BoardID is switchable. Easily visible LED indicators on board to do diagnosis. Direct wire to servo drive to save terminal board space while installation. Horizontal installation for for servo or stepping motor driver....
2590x1942 5.0MP 1/2.5" Mono 14fps GigE Best price/performance ratio CCD and CMOS sensor options. Resolution up to 20 MP. 100 m cable length. Ultra small form factor. Built in 56 MB frame buffer. Power over Ethernet.
2-port 6-Axis EtherCAT Universal PCI Ma 650MHz dual-core ARM processor. 2 x EtherCAT ports for high-performance of Motion and I/O applications. Supports common motion SDK for rapid application development. Up to 32 axes support for motion control. Supports a maximum of 6 motion groups and 8 axes per group. Supports on board 8-CH isolated DI and 4-CH...
Full Function 64-Axis EtherCAT PCIE Mast 667MHz dual-core ARM processor. 2 x EtherCAT ports for high-performance of motion and I/O applications. Supports common motion SDK for rapid application development. Up to 64 axes support for motion control. Supports PTP, linear and circle interpolation, Path table, Compare, Latch, Compare delay DO trigger...
2-axis Stepping/Pules-type Servo Motor C Independent 2-axis motion control. Hand wheel and jog function. 2-axis linear interpolation function. 2-axis circular interpolation function. Continuous interpolation function. Programmable T/S-curve acceleration/deceleration rate. Up to 4 Mpps output for each axis. Two pulse output types: CW/CCW or...
32-ch IDI EtherCAT Remote I/O module Suitable for EtherCAT networks. 32-ch digital input with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for up to 256 slave IDs.
PCI-1240 Wiring Terminal, DIN-rail Mount DIN-rail wiring board. Dimensions (W x L x H): 77.5 x 179.5 x 41.5 mm (3.1" x 7.1" x 1.6"). 50-pin SCSI and IDC connectors.
6 port EtherCAT Junction Realizing flexible wiring by daisy chain and branch connection. Easy to maintain. To prevent entire system breakdown. EtherCAT conformance test tool verified.
2-port 16-Axis EtherCAT PCI Master Card 650MHz dual-core ARM processor. 2 x EtherCAT ports for high-performance of Motion and I/O applications. Supports common motion SDK for rapid application development. Up to 32 axes support for motion control. Supports a maximum of 6 motion groups and 8 axes per group. Supports on board 8-CH isolated DI and 4-CH...
PCI Express x4, 4-Port USB 3.0 Host Adap Host Controller – Fresco FL1100. LED indicator for each port. PCIe 2.0 x4 interface delivering 2 Gbps total bandwidth. Supports 1500-mA max. current per port. Supports four USB 3.0. Supports cable-lock mechanism for reliable cable connection. Supports Microsoft Windows 7/8.1/10 and Linux.
Enhanced 8-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Supports linear and circular interpolation. Hardware emergency input. Supports E-Gear. Supports programmable acceleration/deceleration rate. Memory buffer (10K points) for trajectory planning which is designed in...
1282x1026 1.3MP 1/1.8" Mono 60fps GigE Best price/performance ratio CCD and CMOS sensor options. Resolution up to 20 MP. 100 m cable length. Ultra small form factor. Built in 56 MB frame buffer. Power over Ethernet.
Standard 8-Axis DSP-Based SoftMotion Co Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...
16-ch IDI & 16-ch IDO EtherCAT Remote I/ Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT...
Basic 64-Axis EtherCAT PCIE Master Card 667MHz dual-core ARM processor. 2 x EtherCAT ports for high-performance of Motion and I/O applications. Supports common motion SDK for rapid application development. Up to 64 axes support for motion control. Supports point to point move. Supports 2 axis Linear interpolation. Supports programmable...
8-axis EtherCAT Motion Slave Module w/ 1 Max. 5 MHz, 8-axis pulse output. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. BoardID is switchable. Easily visible LED indicators on board to do diagnosis. Direct wire to servo drive to save terminal board space while installation. Horizontal installation for for servo or stepping motor...
8-ch IDI & 8-ch Relay EtherCAT Remote I/ Suitable for EtherCAT networks. 8-ch Isolated Digital Input and 8-ch Form A-type Relay Output. High-voltage isolation on input channel (2,500 VDC). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for up...
16 IDI & 8 Photo MOS EtherCAT Remote I/O Suitable for EtherCAT networks. 16-ch digital input and 8-ch PhotoMOS Relay output (Form A). 1500 VDC optical isolation for relay outputs. Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for up to 256...
32-channel Isolated Digital Output Modu Max. 20 Mbps transfer rate. Onboard terminal for direct wiring. Easy installation with RJ45 phone jack and LED diagnostic. LED indicator for each IO channel (switch by SW4). Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch Digital I/O). 2,500 VRMS Isolation voltage. Suitable for DIN-rail...
32-channel Isolated Digital Input Module Max. 20 Mbps transfer rate. Onboard terminal for direct wiring. Easy installation with RJ45 phone jack and LED diagnostic. LED indicator for each IO channel (switch by SW4). Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch Digital I/O). 2,500 VRMS Isolation voltage. Suitable for DIN-rail...
4-Axis Motion Slave for Panasonic Minas Max. 20 Mbps transfer rate. Max. 6.5 Mhz, 4-Axes pulse output. 28 bits counter for incremental encoder. 2~4 axes Linear interpolation. 2 axes circular interpolation. T-curve and S-curve velocity profiles support. Change speed on-the-fly. Easy installation with RJ45 phone jack and LED diagnostic. Easy installation...
EtherCAT IO Master PCIE Card 667MHz dual-core ARM processor. 2 x EtherCAT ports for 250/200us cycle time. Up to DI 1024 CH / DO 1024 CH / AI 128 CH / AO 128 CH IO Control. Diagnostics for fast error handling can trace command and error message.
16 IDI & 16 Relay EtherCAT Remote I/O mo Suitable for EtherCAT networks. 16-ch Isolated Digital Input and 16-ch Form A-type Relay Output. High-voltage isolation on input channel (2,500 VDC). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for...
32-ch IDO EtherCAT Remote I/O module Suitable for EtherCAT networks. 32-ch digital output with 2,500 VDC isolation. Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for...
4-ch, 16-bit Isolated AO EtherCAT Slave Suitable for EtherCAT networks. 4-ch, 16-bit analog output channels with 2,500 VDC isolation. Voltage or current output with multiple ranges. Quick removable European type connector. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two rotating switches for up to 256 slave IDs.
8-ch, 16-bit Isolated AI EtherCAT Slave Suitable for EtherCAT networks. 8-ch, 16-bit analog input channels with 2,500 VDC isolation. ±275 V high common-mode voltage range. Quick removable European type connector. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two rotating switches for up to 256 slave IDs.
Enhanced 4-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Supports linear and circular interpolation. Hardware emergency input. Supports E-Gear. Supports programmable acceleration/deceleration rate. Memory buffer (10K points) for trajectory planning which is designed in...
4-Axis 100-pin SCSI DIN-rail motion wiri DIN-rail wiring board for PCI-1240/1245/1245E/1245V/1245L/1265/1285/1285E application. Dimensions (W x L x H): 122 x 171 x 45mm (4.8" x6.73" x 1.77"). DB-26 connector. LED indicators.
2-Axis 50-pin SCSI DIN-rail motion wirin DIN-rail wiring board. Dimensions (W x L x H): 103 x 120 x 45 mm (4.12" x 4.8" x 1.8"). DB-26 and connector. LED indicators.
4-ch, 16-bit Isolated AO EtherCAT Slave Suitable for EtherCAT networks. 4-ch, 16-bit analog output channels with 2,500 VDC isolation. Voltage or current output with multiple ranges. Quick removable European type connector. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two rotating switches for up to 256 slave IDs.
AMAX-2240 Series wiring board DIN-rail wiring board. Dimensions (W x L x H): 160 x 50 x 43 mm (6.3" x 2" x 1.7"). 40-pin box header connector. LED indicators.
4-Axis Stepping/Pules-type Servo Motor C Independent 4-axis motion control. Hand wheel and jog function. 2/3-axis linear interpolation function. 2-axis circular interpolation function. Continuous interpolation function. Programmable T/S-curve acceleration/deceleration rate. Up to 4 MPPS output for each axis. Two pulse output types: CW/CCW or...
Economic 4-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported). Supports E-Gear (only for PCI-1245E). Hardware emergency input. Watchdog timer. Position latch via ORG & index signal....
Standard 6-Axis DSP-Based SoftMotion Con Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer (10K points) for trajectory planning which is designed in DSP. Supports E-Gear, and helical interpolation. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP. Hardware...
Economic 8-Axis DSP-Based SoftMotion Co Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode. Pulse output up to 5 Mpps. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported). Supports E-Gear (only for PCI-1245E). Hardware emergency input. Watchdog timer. Position latch via ORG & index signal....
Open Frame 2-Axis Motion Module End limit logic is switchable (high or low active). BoardID is switchable. Easily visible LED indicators on board to do diagnosis. Direct wire to servo drive to save terminal board space while installation. Max. 6.5 MHz, 4-axis pulse output. 28 bits counter for incremental encoder. Horizontal installation for for servo or...
Open Frame 32-ch Isolated DI Module Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable. Onboard screw terminal for direct wiring. 2,500 VRMS Isolation voltage. Suitable for DIN-rail mounting. BoardID is switchable. Easily visible LED indicators on board to do diagnosis.
Open Frame 32-ch Isolated DO Module Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable. Onboard screw terminal for direct wiring. 2,500 VRMS Isolation voltage. Suitable for DIN-rail mounting. BoardID is switchable. Easily visible LED indicators on board to do diagnosis.
Open Frame 16-ch Isolated DI/16-ch DO Mo Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable. Onboard screw terminal for direct wiring. 2,500 VRMS Isolation voltage. Suitable for DIN-rail mounting. BoardID is switchable. Easily visible LED indicators on board to do diagnosis.
2-port AMONet RS-485 Master Card Max. 20 Mbps transfer rate. 2 independent AMONet RS-485 Master Rings. Max. 128 AMONet RS-485 slave modules supported. Programmable digital input to notify events. Easy installation with RJ45 phone jack and LED diagnostic.
2-port 10-Axis EtherCAT PCI Master Card 650MHz dual-core ARM processor. 2 x EtherCAT ports for high-performance of Motion and I/O applications. Supports common motion SDK for rapid application development. Up to 32 axes support for motion control. Supports a maximum of 6 motion groups and 8 axes per group. Supports on board 8-CH isolated DI and 4-CH...
8-ch, 16-bit Isolated AI EtherCAT Slave Suitable for EtherCAT networks. 8-ch, 16-bit analog input channels with 2,500 VDC isolation. ±275 V high common-mode voltage range. Quick removable European type connector. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two rotating switches for up to 256 slave IDs.
16-ch Isolated DI and 16-ch Isolated DO EtherCAT Remote I/O Module Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status....
16ch IDI & 16ch PNP IDO EtherCAT IO Mod Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT...
32-ch IDI EtherCAT Remote I/O module Suitable for EtherCAT networks. 32-ch digital input with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for up to 256 slave IDs.
32-ch IDO EtherCAT Remote I/O module Suitable for EtherCAT networks. 32-ch digital output with 2,500 VDC isolation. Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for...
32-ch Isolated DI and 32-ch Isolated DO EtherCAT Remote I/O Module Suitable for EtherCAT networks. 32-ch digital input and 32-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch). Quick removable European type connector. LED indicators for I/O status....
16 IDI & 16 Relay EtherCAT Remote I/O m Suitable for EtherCAT networks. 16-ch Isolated Digital Input and 16-ch Form A-type Relay Output. High-voltage isolation on input channel (2,500 VDC). Quick removable European type connector. LED indicators for I/O status. Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode. Two Rotary switches for up...
ICAM-7100 1.2MP Mono smart camera Up to 5.0MP resolution with advanced image preprocessing (e.g. white balance, color debayering, and denoising). IP67 rating ultra-small form factor (93 x 63 x 40.5 mm). High performance multi-core processor (Intel® ATOM® Processor E3930, 1.30 GHz) and FPGA heterogeneous computing.
ICAM-7110 1.2MP color smart camera Up to 5.0MP resolution with advanced image preprocessing (e.g. white balance, color debayering, and denoising). IP67 rating ultra-small form factor (93 x 63 x 40.5 mm). High performance multi-core processor (Intel® ATOM® Processor E3930, 1.30 GHz) and FPGA heterogeneous computing.
ICAM-7500 5MP Mono Smart Camera Up to 5.0MP resolution with advanced image preprocessing (e.g. white balance, color debayering, and denoising). IP67 rating ultra-small form factor (93 x 63 x 40.5 mm). High performance multi-core processor (Intel® ATOM® Processor E3930, 1.30 GHz) and FPGA heterogeneous computing.
ICAM-7510 5MP Color Smat camera Up to 5.0MP resolution with advanced image preprocessing (e.g. white balance, color debayering, and denoising). IP67 rating ultra-small form factor (93 x 63 x 40.5 mm). High performance multi-core processor (Intel® ATOM® Processor E3930, 1.30 GHz) and FPGA heterogeneous computing.
4608x3288 14MP 1/2.3" Color 7fps GigE Best price/performance ratio CCD and CMOS sensor options. Resolution up to 20 MP. 100 m cable length. Ultra small form factor. Built in 56 MB frame buffer. Power over Ethernet.
1602x1202 2MP 1/1.8" Mono 60fps GigE Best price/performance ratio CCD and CMOS sensor options. Resolution up to 20 MP. 100 m cable length. Ultra small form factor. Built in 56 MB frame buffer. Power over Ethernet.
