SCSI-100 to 2*SCSI-50 Shielded Cable, 2m 100-Pin to two 50-Pin SCSI-II Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 20276...
32-ch Isolated Digital I/O Universal PCI Card ISA-compatible with PCL-730. 32-ch TTL DI/O (16-ch digital input,16-ch digital output). High output driving capacity. Interrupt handling capability. 2 x 20-pin connectors for isolated DI/O channels. 2 x 20-pin connectors for TTL DI/O channels. D-type connector for isolated input and output channels....
8-ch Relay and 8-ch Isolated Digital Input PCI Card Wide input range (10 ~ 50 VDC). 8 relay output channels and 8 isolated digital input channels. LED indicators to show activated relays. 4 Form C and 4 Form A type relay output channels. Interrupt handling capability. Output status read-back. Retained relay output values when hot system reset....
16-ch Relay and 16-ch Isolated Digital Input PCI Card 16 relay output channels and 16 isolated digital input channels. LED indicators to show activated relays. Jumper selectable Form A/Form B-type relay output channel. Wide input range (10 ~ 50 VDC). Retain relay output values when hot system reset. High-voltage isolation on input channels (2,500 VDC)....
32-ch Isolated Digital I/O and 1-ch Counter PCI Card 16 isolated DI and 16 isolated DO channels. High voltage isolation on all isolated channels (2,500 VDC). High sink current on isolated output channels (200 mA/channel). Supports dry contact or 5 ~ 50 VDC isolated inputs. Interrupt handling capability. Timer/counter interrupt capability.
64-ch Isolated Digital I/O PCI Card Either ± voltage input for DI by group. High-voltage isolation input/output channels (2,500 VDC). Interrupt handling capability. High over-voltage protection (70 VDC) for DI. High-sink current on isolated output channels (200 mA max./channel). Output status readback. Keeps output settings/ values after system hot reset....
DB37 Cable, 2m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
96ch TTL Digital I/O Card Up to 192 (96 + 96) TTL digital I/O lines. Emulates mode 0 of 8255 PPI. Buffered circuits for higher driving capacity than 8255. Multiple-source interrupt handling. Interrupt output pin for simultaneously triggering external devices with the interrupt. Output status read-back. “Pattern match” and “Change of state” interrupt...
Isolated DC Input/Output Module 1000 V DC , fully isolated. Easy input/output range configuration. Low power consumption, 0.85 W (Voltage Output). Wide input/output range. Flexible DIN-rail mounting. Operates from single +24 VDC. Temperature range 0 to 70°C.
Double-shielded cable with DB-62 connectors, 1m DB-62 pin male black insulated connector x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL2464 approved. Color : Gray.
10 kS/s, 12-bit, 8-ch Multifunction USB Module Supports USB 2.0. Bus-powered. 8 x analog input channels. 12-bit resolution AI. Sampling rates up to 10 kS/s. 8-ch DI/8-ch DO, 2-ch AO and one 32-bit counter. Portable.
50-pin DIN-rail Wiring Board w/ LED Indicators Low-cost DIN-rail mounting wiring terminal module for PCI-1752/1754/1756 with 50-pin SCSI female connector. Screw-clamp terminal blocks allow easy and reliable connections. Each LED indicates its current bi-directional I/O logic status with either green or red light. Case dimensions (W x L x H): 77.5 x 179.5...
DB37 Cable, 1m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
DB37 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector. Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0"). To Be Used With PCI-1713U, PCI-1715U, PCI-1718HDU, PCI-1720U, PCI-1730U, PCI-1733, PCI-1734, PCI-1750, PCI-1760U, PCI-1761.
32-ch Isolated Digital I/O with universal output PCIE Card 16-ch isolated digital input. 16-ch isolated digital output for both PNP(source)/ NPN (sink) type. High output driving capacity. DO type selectable by software. High isolation voltage (2,500 VDC). Interrupt handling capability for all DI channels (PCIE-1750UH only). Selectable digital filter time...
DB9 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector. Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1" x 1.8" x 2.0"). To Be Used With PCI-1714U/UL, PCL-728, PCL-740, PCL-741, PCL-743B, PCL-745B.
48 kS/s, 14-bit, 8-ch Multifunction USB Module Supports USB 2.0. Bus-powered. 8 x analog input channels. 14-bit resolution AI. Sampling rate up to 48 kS/s. 8-ch DI/8-ch DO, 2-ch AO and one 32-bit counter. Portable.
68-pin DIN-rail SCSI Wiring Board DIN-rail mounting screw terminal module for industrial applications with 68-pin SCSI female connecto. Case dimensions (W x L x H): 77.5 x 191.2 x 51 mm (3.1" x 8.4" x 2.0"). To Be Used With PCI-1710U/UL/1710HGU/1711U/UL,PCI-1712/L,PCI -1716/L,PCI-1741U/1742U/1747U/1780U.
128-ch Isolated Digital I/O PCI Card 64-ch isolated digital output and 64-ch isolated digital input. Interrupt handling capability for each channel. Digital Filter function. Wide output range (5 ~ 40 VDC); input range (5 ~ 25 VDC). High-sink current for isolated output channels (200mA max./Channel). High ESD protection (2,000 VDC). Current protection for...
IDC-50 Flat Cable, 1.2m 8-ch relay actuators output. Opto-isolated 8-ch digital input. LED indicators to show activated relays. Onboard relay driver circuits. Onboard input signal conditioning circuits.
68-Pin to Two 50-Pin Converter Module DIN-rail mounting terminal for industrial applications with 68-pin SCSI-II female connector. Converts one 68-pin SCSI-II connector to 50-pin Opto-22 compatible box headers. Case dimensions ( W x L x H) : 77 x 101 x 54.3 mm (3.0 " x 4.0 x 2.1). To be used with PCI-1751,PCI-1753,PCI-1753E.
32-ch Isolated Digital Output PCI Card ISA-Compatible with PCL-734. 32-ch Isolated digital output. High output driving capacity. D-type connector for isolated output channels. High-voltage isolation on output channels.
SCSI-100 to 2*SCSI-50 Shielded Cable, 1m 100-Pin to two 50-Pin SCSI-II Cable. Half pitch 100 pin: Male gold flash contacts, black insulator. Half pitch 50 pin: Male gold flash contacts, black insulator x 2. 25 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 20276...
SCSI-68 Shielded Cable, 2m Weight :240g. Double-shielded cable with SCSI-II 68-pin male connector. Insulated half pitch 68pin copper alloy gold plated male connector with thumb screw. 34 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919 approved. Color :Grey.
4-port RS-232 High-speed PC/104 Module Transmission speeds up to 460 kbps (PCM-3641). Shared IRQ settings for each of 4 RS-232 ports (PCM-3641). Standard PC ports: COM1, COM2, COM3, COM4 compatible. Supports Windows 98/2000/XP. Supports WinCE 3.0, 4.2. Powerful and easy-to-use utility (ICOM Tools).
SCSI-68 Wiring Terminal w/CJC, DIN-rail Low-cost screw-terminal with 68-pin SCSI-II connector. Onboard CJC (Cold Junction Compensation) circuits for direct thermocouple measurement. Reserved space for signal-conditioning circuits such as low-pass filter, voltage attenuator and current shunt. Industrial-grade screw-clamp terminal blocks for heavy-duty and...
100-pin DIN-rail SCSI Wiring Board Low cost universal DIN-rail mounting screw terminal module for industrial applications with 100-pin SCSI female connector. Dimensions (W x L x H): 80 x 230 x 42 mm (3.14" x 9.05" x 1.65").
250 kS/s, 16-bit, 64-ch Analog Input Universal PCI Card 64-ch single-ended or 32-ch differential or a combination of analog input. 16-bit A/D converter, with up to 250 kHz sampling rate. Auto calibration. Onboard FIFO memory (1,024 samples). PCI-Bus mastering data transfer. Universal PCI Bus (support 3.3 V or 5 V PCI bus signal). BoardID™ switch.
SCSI-68 Shielded Cable, 1m Weight :240g. Double-shielded cable with SCSI-II 68-pin male connector. Insulated half pitch 68pin copper alloy gold plated male connector with thumb screw. 34 twist pairs tinned and strand copper wire with drain wire. Aluminum/Mylar foil and braided copper double-shielded cable. P.V.C. jacket. UL 2919 approved. Color :Grey.
Dual Port Isolated CAN Module Operates two separate CAN networks at the same time. High speed transmission up to 500 kbps. Optical isolation protection of 1,000 VDC ensures system reliability. 16 MHz CAN controller frequency. Wide IRQ selection for each port: IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12, 15. LEDs indicate Transmit/Receive status on each port. Direct...
4-Port SuperSpeed Isolated USB 3.0 Hub 2,500 VDC voltage isolation for upstream port. 4 downstream USB 3.0 SuperSpeed ports. Supplied by external 10 ~ 30 VDC power or by USB bus power. ESD protection up to ±8 kV (level 3). LED indicators for power-on and speed of each downstream port.
32ch Iso. DIO and 32ch TTL DIO PCI Expre 32-ch isolated DI/O (16-ch digital input, 16-ch digital output). 32-ch TTL DI/O (16-ch digital input,16-ch digital output). High output driving capacity. Interrupt handling capability. 2 x 20-pin connectors for isolated DI/O channels and 2 for TTL DI/O channels. D-type connector for isolated input and output...
32ch Iso. DIO and 32ch TTL DIO w/ Filter 32-ch isolated DI/O (16-ch digital input, 16-ch digital output). 32-ch TTL DI/O (16-ch digital input,16-ch digital output). High output driving capacity. Interrupt handling capability. 2 x 20-pin connectors for isolated DI/O channels and 2 for TTL DI/O channels. D-type connector for isolated input and output...
16-ch Relay and 16-ch Isolated Digital Input PCIe Card 16-ch digital input and 16-ch relay. Interrupt handling capability for all DI channels. Selectable Digital filter time for all DI channels. Output status readable. LED indicator to show activated relays. Selectable Form A or Form B.
IEEE-488.2 Interface Low Profile Universal PCI Card IEEE 488.2 Standard interface. Support industrial standard VISA. Complete Talker/Listener/Controller. Includes GPIB-Library software. Data transfer rates over 1.5 MB/s. High-Speed State Machine Bus Manager. 7 Interrupt lines, shared interrupt capability. Transparent interrupt enabling/disabling. Low...
DB62 DIN-rail Wiring Board Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB62 female connector. Screw-clamp terminal blocks allow easy and reliable connections. Case dimensions (W x L x H): 77.5 x 124.5 x 63.5 mm (3.1" x 4.9" x 2.5"). To Be Used With PCI-1762.
216 kS/s, 24-bit, 4-ch Dynamic Signal Acquisition PCIE Card 24-bit resolution ADCs with 115 dB dynamic range. Wide input ranges from ±0.2 V to ±10 V. Software selectable AC/DC coupling. Software configurable 4 or 10 mA Integrated Electronic Piezoelectric Excitation (IEPE). Built-in anti-aliasing filter. 8 simultaneously sampled analog inputs up to 216...
DB37 Cable, 3m Double-shielded cable with 37-pin D-sub connectors. D-Sub 37 pin male, Blue x 2. Tinned and strand copper wire with drain wire x 1. Aluminum/Mylar foil and braided copper double-shielded cable. Isolated P.V.C. jacket. UL20397 approved. Ivory Color.
20-pin DIN-rail Flat Cable Wiring Board Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connector. Case dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0"). To Be Used With PCI-1735U, PCL-711B, PCL-720+, PCL-726, PCL-727, PCL-730, PCL-812PG, PCL-816, PCL-818 Series, PCL-836.
16-ch Isolated Digital I/O PC/104 Module High output driving capacity and high-voltage isolation. Opto-isolated eight DI and eight DO channels. TTL-level 16 DI and 16 DO channels. Interrupt handling capacity. High output driving capacity.
Isolated Strain Gauge Input Module 1000 VDC 3-way optical isolation. Switch configurable mV or V input of full bridge. Switch configurable voltage and current outputs.
32-ch Isolated Digital Input PCI Card ISA-Compatible with PCL-733. 32-ch Isolated digital input. High output driving capacity. Interrupt handling capability. D-type connector for isolated input channels.
8-ch, 16-bit, 200 kS/s, AI iDAQ module Hot-swappable in iDAQ system. Detachable Euro-type spring terminal connectors. 8 x 16-bit analog input channels with 600VRMS isolation. Supports voltage and current measurements. Wide common-mode voltage range (±275 V).
64-ch Isolated Digital I/O PCI Express C Wide output range (5 ~ 40 VDC). High sink current on isolated output channels (500mA max./ch). Wide input range (10 ~ 30 VDC). High-voltage isolation (2,500 VDC). Interrupt handling capability. 2,000 VDC ESD protection. Either +/- voltage input for DI by group. High over-voltage protection (70 VDC). High-voltage...
24-ch Digital I/O Low Profile Universal PCI Card Low profile PCI form factor. Supports both dry and wet contact. 24 TTL level digital I/O channels. Emulates mode 0 of 8255 PPI. Buffered circuits provide higher driving capability. Interrupt handling capability. Output status read-back. I/O configurable by software or on board DIP switch. Keeps the output...
5-port Full-speed Isolated USB 2.0 Hub 5 downstream USB 2.0 ports. Compatible with USB 2.0 Full-speed. 3,000 VDC voltage isolation for each downstream port. Suitable for DIN-rail mounting. One lockable USB cable included. 10 ~ 30 VDC power input (power adapter not included*).
16-ch Relay Output Terminal Automatic selection of control logic (PLCD-785B only): Negative logic for the Opto-22 connector Positive logic for the 20-pin flat cable connector. Screw terminals for easy output wiring. LED status indicators.
8-ch, 24-Bit, 128kS/s PCIE DSA Card 8 simultaneously sampled analog inputs, up to 128 kS/s. 24-bit resolution ADCs with -102 dB total harmonic distortion plus noise (THD+N).
