RS-232 to RS-422/485 converter w/ iso. Automatic RS-485 data flow control. 3000 VDC isolation protection. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. LED indicator to monitor status.
RS-422/RS-485 Repeater with Isolation Automatic RS-485 data fl ow control. 3000 VDC isolation protection. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. LED indicator to monitor status.
Fiber Optic To RS-232/422/485 Converter 2 x ST fiber connector. Operation mode: Point-to-Point, and Ring (half-duplex). Half/Full-duplex, bidirectional transmission mode. Automatic RS-485 data flow control. LED indicator to monitor status.
Robust RS-232 to RS-422/485 Isolated Converter Convert RS-232 to RS-422/485 signals. Extend RS-232 data signals up to 1.2 km. Data rate: 115.2 kbps. 3000 VDC Isolation. Auto-detection on baud rate / data format. DIP switch for RS-422 or RS-485 selection. Build-in 120 ohm termination resistors . Power requirement +10 to +48 VDC. Operating Temperature -40...
Serial Cable, RS-232 Null Modem, DB9 F / F, 3.05 m / 10 ft RS-232 null modem cable. DB9 female to DB9 female connectors. Length: 3.05 m (10 ft). Over-molded connectors with thumb screws. See datasheet for cross-over diagram.
Serial Repeater, RS-422/485 TB, Isolated, Ind. Panel, C1D2 RS-422/485 Repeator. 2kV, 3-way isolation (input/output/power). Data rates:1.2 to 115.2 Kbps. Wide operating temperature range: -40 to +85 °C. IEC-61850-3, IEEE-1613, NEMA TS2, FCC, CE. 10 to 48 VDC input power (power supply required, sold separately).
Serial Repeater, RS-422/485 TB, Isolated, Ind. DIN Extends RS-422/485 additional 1.2km. 2 KV isolation; 600W surge suppression. -40 to +80 °C wide operating temperature. 10-30 Vdc power supply required (not included, sold separately). DIN rail mount (panel mount adapter available). cULus Recognized, UL508.
Serial Converter, RS-232/422/485 TB to MM Fiber ST, Ind. DIN, C1D2 Converts serial data signals to multi-mode ST fiber optic. 2 KV 3-way optical isolation (input/output/power); EMI/RFI protection. Data rate: up to 115.2 kbps. Wide operating temperature: -40 to +80 °C. DIN mount, IP20 plastic case. 10–48 VDC power source required (not included, sold...
Serial Converter, RS-232 DB9 F to RS-485 2W DB9 F, Port Powered Extend RS-232 data signals up to 1.2 km (4,000 ft). Change RS-232 TD and RD to RS-485 signals. Automatic Send Data Control - no software drivers necessary. Baud rates up to 115.2 kbps. Powered from RS-232 handshake lines - no power supply required.
Serial Converter, RS-232 DB9 F to RS-422/485 DB9F, Port Power Ability RS-232 to RS-485 Converter. Extend RS-232 data signals up to 1.2 km (4,000 ft.). Data rate: 115.2 kbps. Quick, inline installation. DIP switch selectable RS-422 or RS-485. RS-232 port power or external 12 Vdc power jack (power supply not included, sold separately).
Serial Converter, RS-232 DB9 F to RS-485 2W TB, Port Powered Extend RS-232 data signals up to 1.2 km. Convert RS-232 TD and RD to RS-485 signals. Data rate: up to 115.2 kbps. Automatic Send Data Control - no software drivers necessary. Powered from RS-232 handshake lines - no power supply required.
RS-422/485 Repeater Automatic RS-485 data flow control. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. Networking up to 1200 meters (4000 feet). LED indicator to monitor status.
RS-422/485 Repeater Automatic RS-485 data flow control. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. Networking up to 1200 meters (4000 feet). LED indicator to monitor status.
PS, WW, 5DC,18W, 3.6A, 2.1X9.5MM,INT KIT DOE Level VI, CEC, ErP Stage 2 Energy Efficiency. Universal Input Voltage Range – 90 to 264 VAC. 12V DC, Up to 18 Watt Continuous Output Power. Interchangeable, Int’l AC Input Blades (included) (NAM, EU, UK, Australia, China). No Load Power Consumption, < 0.1W. Over-voltage, Over-current, Short Circuit Protections.
ULI-211E Serial Converter, RS-232 TB to MM Fiber ST, Ind. Panel, C1D2 Converts serial data signals to multi- or single-mode fiber. 2 KV, 3-way isolation (input, output, power circuits). Data rate: 9.6 to 115.2 kbps (bit-wise enable). -40 to +85°C wide operating temperature. IP30 metal panel mount case (DIN rail adaptable). FCC, CE, IEC-61850-3, IEEE...
PSU, 12 Vdc Output, 0.5A, 6W DOE Level VI, CoC, Tier 2 Energy Efficiency. Universal Input Voltage Range: 90 ~ 264 Vac. Up to 6 Watt Continuous Output Power. Single Regulated DC Output: 5 ~ 15 Vdc. Interchangeable, International AC Input Blades (kit included). Over-voltage and Short Circuit Protections. cULus, GS, RCM, CCC, PSE, CE, RoHS, FCC.
Serial Accessory, DIN CLIP for Ilinx Serial Converters Replacment DIN Rail Clip.
Isolated RS-232 to RS-422/485 Converter Automatic RS-485 data flow control. 3000 VDC isolation protection. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. LED indicator to monitor status.
Isolated RS-422/485 Repeater Automatic RS-485 data fl ow control. 3000 VDC isolation protection. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. LED indicator to monitor status.
RS-422/485 repeater Rev.DE Automatic RS-485 data flow control. Surge protection RS-485 data line. Transmission speed up to 115.2 Kbps. Networking up to 1200 meters (4000 feet). LED indicator to monitor status.
Serial Surge Protector, RS-485 Data Line, 3 Stage, DIN Three stages of protection on every data line: Gas discharge tube, Series resistor, Transient voltage suppressor. Protected signal ground connection. Terminal Block. Dedicated chassis ground lug. DIN Rail Mounting.
Serial Converter, RS-232 DB25 F to RS-485 TB Converts RS-232 to RS-485 signals. Extends data communication up to 1219 meters (4000 ft). Data rate: up 115.2 kbps. Quick inline installation. Terminal block for easy wiring. Multi-drop capability - up to 32 receivers per driver. 12 Vdc power supply required (not included, sold separately).
Port Powered RS-232/485 Converter – DB9F-RJ11 Extend RS-232 data signals up to 1.2 km (4,000 ft). Change RS-232 TD and RD to RS-485 signals. Automatic Send Data Control - no software drivers necessary. Baud rates up to 115.2 kbps. Powered from RS-232 handshake lines - no power supply required.
9PIN/TB 485CONV W/SD CTRL Converts RS-232 signals to RS-485 signals. Extends data communication up to 1219 meters (4000 ft). Multi-drop capability - up to 32 receivers per driver. Pluggable terminal block for easy wiring. Data rate: up to 115.2 kbps. Quick, easy inline installation. 12 VDC power supply required (not included, sold separately).
REV 232/422CONV W/LED Converts unbalanced RS-232 signals to balanced RS-422 signals. Extends RS-232 line up to 1200 meters (4000 ft). Data rate: up to 90 kbps. Quick, easy inline installation. RS-422 driver can drive 10 RS-422 receivers in parallel (use in multi-drop systems). 12 Vdc, 100 mA power supply required (not included, sold separately).
Serial Converter, RS-232 DB-25 M to RS-422 DB25 F Converts unbalanced RS-232 signals to balanced RS-422 signals . Extends RS-232 line up to 1200 m (4000 ft). Data rates up to 90 Kbps. RS-422 driver can drive 10 RS-422 receivers in parallel ( use in multi-drop systems). DB25 M / DB25 F. Power supply required (not included, sold separately).
Serial Isolator, CAN, TB Boost signals and increase node capacity of CAN networks. Works with various CAN protocols and frame lengths. 2,000V optical isolation protection from surges and spikes. Data rate: up to 250 kbps (bit-wise enable). Terminal block CAN connections (copper). DIN rail mount enclosure - ideal for industrial cabinets. 10-30 VDC external...
RS-232 Isolated extender, Heavy Industri Extends RS-232 data signals. 2kV, three-way isolation (input/output/power). Data rate: 1.2 to 115.2 kbps. Wide operating temperature: -40 to +85 °C. Rugged IP30 metal case (panel or DIN rail mount). 10-48 Vdc input power (power supply required, sold separately). IEC-61850-3, IEEE-1613, NEMA TS2, FCC, CE, NEMA TS2,...
Serial Repeater, RS-422/485 TB, Isolated Device and data 2 kV optical isolation and 1.2 km (4000 ft) extension. Add up to 32 nodes to RS-485 network. Inline installation. External 12 Vdc power source required (included). Modbus support.
Serial Repeater, RS-422/485 TB, Isolated, Ind. DIN, High Speed Extends RS-422/RS-485 an extra 1.2 km (4000 ft). 2 kV Isolation, and IEC ESD protections. Data rate: up to 1.5 Mbps. -40 to +80°C wide operating temperature. DIN rail mount (panel mount with optional brackets). 10 - 30 Vdc power supply required, not included, sold separately.
Serial Repeater, RS-422/485 TB, Isolated, Ind. DIN, C1D2 Repeater extends signals an additional 1200 m. 2 KV, 3-way optical isolation (input/output/power). Data rate: up to 115.2 kbps. Wide temperature range: -40 to +80 °C. DIN rail mount, IP30 case. 10-48 Vdc input (power supply required, not included, sold separately). Allen-Bradley 1747-AIC (DH-485...
Serial Converter, RS-232 MODEM DB25 F to MM Fiber ST Extend serial signals up to 4 km (2.5 mi) over multi-mode fiber. Point-to-point or multi-drop ring configuration. Inherent EMI/RFI immunity/isolation from surges, spikes, ground loops. Data rates: RS-232, up to 115.2 kbps; RS-422/485, 500 kbps. Quick, inline installation. External power source required...
Serial Converter, RS-232 TB to MM Fiber ST, Ind. DIN Converts serial data signals to multi-mode fiber. 2 KV, 2-way isolation; EMI/RFI protection. Data rate: up to 115.2 kbps. Wide operating temperature: -40 to +80 °C. DIN rail mount. 10-30 VDC power source required (not included, sold separately).
Serial Converter, RS-232 TB to MM Fiber ST (Inverted), Ind. DIN, C1D2 Converts serial data signals to multi-mode ST fiber optic. Inverted fiber state - fiber light OFF in idle state. 2 KV 3-way optical isolation (input/output/power); EMI/RFI protection. Data rate: up to 115.2 kbps. Wide operating temperature: -40 to +80 °C. DIN mount, IP20 plastic case....
Serial Isolator, RS-232 Data and Control Signals, DB9 F, DB9 M 2.5 kV isolation. 15kV ESD protection. Data rate: up to 230.4 kbps. Quick in-line installation. 12 VdcPower supply required, sold separately.
Serial Converter, RS-232 DB-25 F to RS-422 DB25 M, Port Powered Converts RS-232 TD and RD to balanced RS-422 signals. Extend RS-232 data signals up to 1.2 km (4,000 ft.). Data rate: up to 115.2 kbps baud. Connectors: DB25 M / DB25 F. Powered from RS-232 handshake lines - no power supply required.
Serial Cable, DB25 M to DB25 F, 1.8 m / 6 ft Fully molded backshell with strain relief for added protection. 26 AWG stranded conductors for flexibility. Thumbscrews for tool-less termination. Wired straight-through. All pins terminated.
Serial Cable, DB25 M to DB25 M, 1.8 m / 6 ft Fully molded backshell with strain relief for added protection. 26 AWG stranded conductors for flexibility. Thumbscrews for tool-less termination. Wired straight-through. All pins terminated.
Serial Cable, DB25 M to DB9 F, 1.8 m / 6 ft PC-AT modem cable converts 25-pin serial to 9-pin AT serial. 9-wire, all pins terminated. 26 AWG stranded conductors for flexibility. Fully molded backshell with strain relief for added protection.
Serial Cable, DB25 M to DB9 F, 0.9 m / 3 ft PC-AT modem cable converts 25-pin serial to 9-pin AT serial. 9-wire, all pins terminated. 26 AWG stranded conductors for flexibility. Fully molded backshell with strain relief for added protection.
Serial Cable, RS-232 Null Modem, DB9 F / F, 0.9 m / 3 ft RS-232 null modem cable. DB9 female to DB9 female connectors. Length: 0.9 m (3 ft). Over-molded connectors with thumb screws.
Serial Cable, RS-232 Null Modem, DB9 F / F, 1.8 m / 6 ft RS-232 null modem cable. DB9 female to DB9 female connectors. Length: 1.8 m (6 ft). Over-molded connectors with thumb screws.
Serial Cable, RS-232 Null Modem, DB9 M / F, 3.05 m / 10 ft RS-232 null modem cable. DB9 male to DB9 female connectors. Length: 3.05 m (10 ft). Over-molded connectors with thumb screws.
Serial Cable, RS-232 Null Modem, DB9 M / F, 7.6 m / 25 ft RS-232 null modem cable. DB9 male to DB9 female connectors. Length: 7.62 m (25 ft). Over-molded connectors with thumb screws.
Serial Cable, RS-232 Null Modem, DB9 M / F, 1.8 m / 6 ft RS-232 null modem cable. DB9 male to DB9 female connectors. Length: 1.8 m (6 ft). Over-molded connectors with thumb screws.
Serial Accessory, 125MA FUSE 4-PACK FOR BB-485CSP2 Replacement fuses for BB-485CSP2.
Serial Port Adapter, DB9 F to RJ-45 Convert RS-232 interface to RJ-45 female interface. Convenient kit for easy on-the-spot field wiring. Enables long distance serial to network communication. Supports custom serial pin-out configurations. Full molded back-shell with strain relief for extra protection.
Serial Cable, RS-232 DB9 M to DB9 F, 0.3 m / 1 ft 28 AWG stranded conductors for flexibility. Thumbscrews for tool-less termination. DB9 male to DB9 female connectors. Fully molded backshell with strain relief for added protection.
Serial Cable, RS-232 DB9 M to DB9 F, 3.05 m / 10 ft 28 AWG stranded conductors for flexibility. Thumbscrews for tool-less termination. DB9 male to DB9 female connectors. Fully molded backshell with strain relief for added protection.
Serial Cable, RS-232 DB9 M to DB9 F, 4.6 m / 15 ft 28 AWG stranded conductors for flexibility. Thumbscrews for tool-less termination. DB9 male to DB9 female connectors. Fully molded backshell with strain relief for added protection.
